HONEYWELL VRN2EPPX8100 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2EPPX8100 is a pressure independent control valve assembly designed for efficient flow management in hydronic systems. This valve is built to maintain temperature stability during pressure changes, ensuring effective temperature control. It features a direct-coupled actuator and an integrated pressure control cartridge for flow balancing.

• Valve sizes from half an inch to three inches with female NPT connections.
• Compatible with hot or chilled water and up to fifty percent glycol solutions.
• Incorporates a differential pressure regulator to ensure consistent pressure drop across the valve seat.

Product Highlights

The Honeywell VRN2EPPX8100 simplifies flow control while maximizing temperature stability in diverse applications.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2EPPX8100

Technical Specifications

• Type: Assembly
• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: One and a half inches
• Pattern: Two-way
• GPM: 20 GPM
• Control Signal: Two Position
• Supply Voltage (Nominal): 120 VAC, 240 VAC
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT fittings
• Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Trim Material: Stainless Steel
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators *
• Product Status: Active