The Honeywell VRN2ENSXA202 is a pressure independent control valve assembly equipped with an electric actuator. It features a one and a half inch NPT connection, a two-way valve pattern, and supports a flow rate of 15 gallons per minute. This valve is made with stainless steel trim and functions with an on/off control signal complemented by a fail-safe closed feature. It operates with a 24 VAC supply voltage and includes one auxiliary switch. The device is housed in a NEMA 3R enclosure, facilitating integrated flow and temperature control.
Features a one and a half inch NPT connection with a two-way valve.
Includes stainless steel trim and an on/off control signal.
Operates on 24 VAC and is protected by a NEMA 3R enclosure.
Product Highlights
This control valve is designed for reliable pressure management in hydronic systems, ensuring efficient temperature regulation.
Product Information
Standard Information
Brand: Honeywell
MPN: VRN2ENSXA202
Technical Specifications
Type
Assembly
Connection
NPT
Input Voltage
24 VAC
Trim Material
Stainless Steel
Pattern
Two-way
Size
One and a half inches
GPM
15 gallons per minute
Control Signal
Two Position
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
Half inch to three inches with female NPT fittings
Body Pressure Rating (maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range
-22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 gpm (half inch valve) to 95 gpm (three inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return
ML6161, ML7161, MN6105, MN7505
Compatible Actuators Spring Return
MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at half inch or three quarter inch
Minimum Torque Required
35 lb-in (4 Nm) up to three inches, 18 lb-in (2 Nm) up to three quarter inch