Honeywell VRN2ENPX8100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2ENPX8100 is a pressure independent control valve with an electric actuator. This valve supports flow and temperature control efficiently. It has a one and a half inch NPT connection and a two-way valve pattern, enabling a fifteen GPM flow capacity. Constructed with plated brass trim, the valve is designed for on/off control with a fail-open configuration. It works with a supply voltage ranging from one hundred to two hundred fifty VAC.

• Features a one and a half inch NPT connection.
• Designed for on/off control with a fail-open configuration.
• Operates with a supply voltage of one hundred to two hundred fifty VAC.

Product Highlights

This control valve is suitable for various heating and cooling systems ensuring precise regulation of water or glycol solutions.

Product Information

Standard Information

• Manufacturer Part Number: VRN2ENPX8100
• Type: Assembly

Technical Specifications

• Connection: NPT
• Supply Voltage (Nominal): 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: one and a half inches
• GPM: fifteen GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): three sixty psi at two hundred fifty degrees Fahrenheit (one hundred twenty one degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty one degrees Celsius)
• Maximum Differential Pressure: one gpm (one half inch valve) to ninety five gpm (three inch valve)
• Close-off pressure: one hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch
• Minimum Torque Required: thirty five lb-in up to three inches (DN80), eighteen lb-in up to three quarter inch and one inch up to nine gpm
• Warranty: one year on valves, five years on actuators