Honeywell VRN2E9SX9202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2E9SX9202 is a pressure independent control valve designed for hydronic systems. This valve features a one and a half inch NPT connection and a two-way configuration. It has a maximum capacity of ninety-five GPM. The valve is constructed with stainless steel trim and includes an on/off fail-safe actuator. It operates with one hundred to two hundred fifty VAC and contains one auxiliary switch. The valve is housed in a NEMA three R enclosure.

• 1-1/2 inch NPT connection with a two-way pattern
• Stainless steel trim with a capacity of 95 GPM
• Operates on 100-250 VAC with one auxiliary switch

Product Highlights

This product controls flow and temperature effectively and is ideal for various heating and cooling systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2E9SX9202

Technical Specifications

• Type: Valve Only
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/2 inch
• GPM: 95 GPM
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)