Honeywell VRN2E7PXA200 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2E7PXA200 is a pressure independent control valve designed for hydronic systems. This valve integrates flow and temperature control to maintain optimal conditions during pressure changes. It is equipped with a pressure control cartridge that balances flow. The valve has threaded connections suitable for sizes ranging from one-half inch to three inches FNPT.

• Compatible with hot or chilled water and up to fifty percent glycol solutions.
• Includes a differential pressure regulator for consistent pressure across its seat.
• Utilizes standard Honeywell direct-coupled actuators for easy operation.

Product Highlights

This valve ensures effective control of water flow and is suitable for various applications in HVAC systems, providing reliable performance in diverse conditions.

Product Information

Standard Information

• Brand: Honeywell
• Type: Assembly

Technical Specifications

• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/2 inches
• GPM: 80 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one-half inch to three inches with female NPT fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (one-half inch valve) to 95 gpm (three inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
• Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-fourths inch (and one inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators