Honeywell VRN2E4PXA200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2E4PXA200 is a pressure independent control valve designed for optimal flow and temperature management. This valve is equipped with an electric actuator that ensures precise temperature control by automatically adjusting the flow. It integrates a pressure control cartridge, allowing for effective flow balancing.

• Features a 1-1/2 inch NPT connection.
• Designed for on/off control with a fail-closed mechanism.
• Operates at 24 VAC with 1 auxiliary switch.

Product Highlights

This valve is suitable for applications requiring reliable flow regulation and is ideal for HVAC systems and heating applications.

Product Information

Standard Information

• Manufacturer: Honeywell
• Brand: Honeywell

Technical Specifications

• MPN: VRN2E4PXA200
• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: 1-1/2 inches
• GPM: 65 GPM
• Pattern: 2-way
• Control Signal: Two Position
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
• Weight: 18 lbs