Honeywell VRN2E3PX5002 Pressure Independent Control Valve

Product Description

The Honeywell VRN2E3PX5002 is a pressure-independent control valve designed for hydronic systems. It regulates flow and maintains temperature, ensuring efficiency while handling pressure changes. This valve is suitable for threaded connections and operates seamlessly with standard Honeywell actuators.

• Size: One and a half inches NPT
• Flow Rate: Sixty gallons per minute
• Control Signal: Modulating Floating

Product Highlights

The Honeywell pressure independent control valve integrates advanced features to enhance system performance in various applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2E3PX5002

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Valve Type: Dynamic Pressure Regulated Control Valve
• Pattern: 2-way
• Size: One and a half inches
• Flow Rate: Sixty gallons per minute
• Control Signal: Analog, Floating
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): Three hundred sixty psi (2500 kPa) at two hundred fifty degrees Fahrenheit (121 degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gpm (one half inch valve) to ninety-five gpm (three inch valve)
• Close-off Pressure: One hundred psi
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three fourths inches (and one inch up to nine gpm)
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three fourths inch (DN15 ~ DN20)