Honeywell VRN2E2SXD000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2E2SXD000 is a pressure independent control valve designed for hydronic systems. This valve effectively integrates flow and temperature control, managing flow automatically to maintain desired temperatures during pressure changes. It is compatible with Honeywell direct-coupled actuators and is suitable for hot or chilled water, including solutions with up to fifty percent glycol.

• NPT connection type
• Stainless steel trim
• Operates on 24 VAC

Product Highlights

This valve is tailored for use in dynamic pressure regulated systems, making it essential for efficient HVAC operations.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2E2SXD000

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Pattern: 2-way
• Size: One and a half inches
• GPM: Fifty-five gallons per minute
• Control Signal: Analog, Floating
• Supply Voltage: 24 VAC
• Trim Material: Stainless Steel
• Body Style: Two-way ball valve, direct flow, full port with patented flow control insert
• Pipe Size: One half inch to three inches with female NPT fittings
• Body Pressure Rating: Maximum 360 psi (2500 kPa) at 250 degrees Fahrenheit
• Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit
• Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at half inch or three quarter inch
• Minimum Torque Required: Thirty-five lb-in up to three inches, eighteen lb-in up to three quarters and one inch up to nine GPM