HONEYWELL VRN2DRPA1000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2DRPA1000 is a pressure independent control valve designed for efficient flow management in various hydronic systems. This product employs an electric actuator to enable automatic control of flow and temperature, adapting to changes in piping pressure. The integrated pressure control cartridge ensures optimal flow balancing and regulation tailored for water or glycol mixtures regulated up to fifty percent.

• Connection size: one and one-fourth inches NPT
• Two-way ball valve type
• Supply voltage: twenty-four VAC

Product Highlights

This valve is essential for maintaining stable system temperatures, providing high functionality in residential and commercial applications.

Product Information

Standard Information

• Brand: Honeywell
• Type: Assembly

Technical Specifications

• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/4 in
• GPM: 30 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 in valve) to 95 gpm (3 in valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators