Honeywell VRN2DPSX6100 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2DPSX6100 is a pressure independent control valve assembly featuring an electric actuator. This assembly includes a one and one-fourth inch NPT connection and operates with a two-way valve pattern, allowing for a flow rate of twenty gallons per minute. Built with stainless steel trim, it supports modulating floating control and operates in a fail-open configuration, making it suitable for various heating and cooling applications.

• Features a one and one-fourth inch NPT connection.
• Suitable for controlling hot or chilled water with up to fifty percent glycol solutions.
• Operates on a twenty-four VAC supply voltage.

Product Highlights

This valve is ideal for systems requiring precise control of water or glycol solutions in heating and cooling systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2DPSX6100

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: One and one-fourth inches
• Pattern: Two-way
• GPM: Twenty GPM
• Trim Material: Stainless Steel
• Supply Voltage (Nominal): Twenty-four VAC
• Control Signal: Analog, Floating
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80); eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators