Honeywell VRN2DMSX6200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2DMSX6200 is a pressure independent control valve with an electric actuator. It features a one and one-quarter inch NPT connection and a two-way valve pattern. This control valve can handle a flow rate of ten gallons per minute and includes stainless steel trim. Designed with a DCA profile, it provides modulating floating control along with a fail-safe closed position. Operating on twenty-four VAC, this valve suits applications for controlling hot or chilled water, including solutions with up to fifty percent glycol.

• 1-1/4 inch NPT connection and 2-way valve pattern.
• Designed for modulating floating control with a fail-safe closed position.
• Compatible with water and glycol solutions up to 50%.

Product Highlights

The VRN2DMSX6200 valve ensures precise control over your water systems, making it an essential component for HVAC applications.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2DMSX6200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1-1/4 in
• GPM: 10 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 to 3 inches with female NPT pipe fittings
• Body Pressure Rating (Maximum): 360 psi at 250°F
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F
• Maximum Differential Pressure: 1 gpm (1/2 in valve) to 95 gpm (3 in valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105, MS6103, MS7503, MS8103 only at 1/2 or 3/4 (DN15 to DN20)
• Minimum Torque Required: 35 lb-in up to 3 in, 18 lb-in up to 3/4 in
• Warranty: 1 year on valves, 5 years on actuators