Honeywell VRN2CNSX8200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CNSX8200 is a pressure independent control valve designed for use in hydronic systems. This valve features an electric actuator that allows it to automatically regulate flow and maintain desired temperature levels, even when there are fluctuations in piping pressures. The valve is equipped with a pressure control cartridge which ensures proper flow balancing and control.

• 1-inch NPT connection.
• 2-way valve pattern.
• Operates on 100-250 VAC.

Product Highlights

The Honeywell VRN2CNSX8200 is built for efficient water or glycol solutions control, making it suitable for a variety of heating and cooling applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CNSX8200

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• GPM: 15 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators