Honeywell VRN2CLSXA202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CLSXA202 is a pressure independent control valve designed for hydronic systems. It integrates flow and temperature control into one unit, maintaining temperature consistently even when pressure varies. The valve utilizes a pressure control cartridge for optimal flow balancing and is compatible with Honeywell actuators. This valve is suitable for controlling hot or chilled water with up to fifty percent glycol solutions.

• 2-way valve pattern with stainless steel trim
• Compatible with pipe sizes from half an inch to three inches
• Designed for water and glycol solutions up to fifty percent concentration

Product Highlights

This valve is a reliable component for HVAC professionals, ensuring precise control in hydronic heating and cooling systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CLSXA202

Technical Specifications

• Type: Assembly
• Connection: NPT
• Size: 1 inch
• Pattern: 2-way
• GPM: 9 GPM
• Valve Type: Dynamic Pressure Regulated Control Valve
• Trim Material: Stainless Steel
• Control Signal: Two Position
• Supply Voltage: 24 VAC
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch and 1 inch up to 9 gpm
• Warranty: 1 year on valves, 5 years on actuators