Honeywell VRN2CLSXA200 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2CLSXA200 is a pressure independent control valve assembly designed for efficient flow and temperature regulation in various hydronic systems. This valve automatically adjusts flow to maintain desired temperature levels, even during pressure changes.

• Integrated pressure control cartridge for better flow balancing.
• Compatible with standard Honeywell direct-coupled actuators.
• Suitable for use with hot or chilled water and up to 50% glycol solutions.

Product Highlights

This valve features high-quality stainless steel trim and NPT connections for reliable performance.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CLSXA200

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: 1 inch
• GPM: 9 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port
• Pipe Size: 1/2 inches to 3 inches
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch and 1 inch up to 9 gpm