Honeywell VRN2CLPX5002 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CLPX5002 is a pressure independent control valve with an electric actuator. This valve helps modulate flow in HVAC applications. It uses a one-inch NPT connection and features a two-way valve pattern. The flow rate is nine gallons per minute. It includes plated brass trim and a dynamic pressure control mechanism. The valve operates on twenty-four volts alternating current.

• Features a one-inch NPT connection and two-way valve pattern.
• Designed for modulating floating control with a fail-in-place function.
• Controls flow to maintain temperature during pressure fluctuations.

Product Highlights

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CLPX5002

Technical Specifications

• Type: Assembly
• Connection: NPT
• Pattern: Two-way
• Size: One inch
• Flow Rate: Nine GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (max): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gpm (half inch valve) to ninety-five gpm (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inch, eighteen lb-in (two Nm) for three-quarter inch
• Warranty: One year on valves, five years on actuators
• Weight: Six point thirty-two lbs