Honeywell VRN2CKSX7202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CKSX7202 is a pressure independent control valve designed for efficient flow and temperature regulation in hydronic systems. This valve features an electric actuator that controls the flow automatically, responding to changes in piping pressure. Its compact size allows for a one-inch NPT connection and an impressive flow rate of eight GPM. Manufactured with a stainless steel trim, this valve is suitable for on/off control and operates under 24 VAC in a protective NEMA 3R enclosure.

• 1-inch NPT connection with an 8 GPM flow rate.
• Constructed with stainless steel and a 2-way valve pattern.
• Functions at 24 VAC within a NEMA 3R enclosure.

Product Highlights

The Honeywell VRN2CKSX7202 provides reliable flow control and maintains system temperature by adjusting to pressure changes.

Product Information

Standard Information

• Manufacturer: Honeywell
• Brand: Honeywell

Technical Specifications

• Product Model: VRN2CKSX7202
• Type: Assembly
• Connection: NPT
• Supply Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• Flow Rate: 8 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3-inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)