Honeywell VRN2CJPXA102 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2CJPXA102 is a pressure independent control valve assembly designed to manage flow in hydronic systems. This valve accommodates varying pressures while ensuring temperature stability. It includes an electric actuator for precise control of water or glycol solutions.

• 1 inch NPT connection for easy installation.
• Compatible with Honeywell direct-coupled actuators.
• Designed for pressures up to 360 psi and temperatures between negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit.

Product Highlights

This valve supports automatic flow and temperature control, suitable for diverse hydronic applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CJPXA102

Technical Specifications

• Type: Assembly
• Connection: NPT
• Size: 1 inch
• Pattern: 2-way
• GPM: 7 GPM
• Valve Type: Dynamic Pressure Regulated Control Valve
• Control Signal: Two Position
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators