Honeywell VRN2CHSX7102 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2CHSX7102 is a pressure-independent control valve designed for hydronic systems. This valve integrates flow and temperature control to maintain consistent temperature during pressure changes. It features an integrated pressure control cartridge that balances and regulates flow efficiently. The valve connects with threaded one-inch FNPT connections and utilizes a Honeywell direct-coupled actuator. Ideal for hot or chilled water systems, this valve accommodates up to fifty percent glycol solutions.

• Features a differential pressure regulator, ensuring a constant pressure drop across the valve.
• Employs a rolling diaphragm design to provide accurate flow control.
• Includes a removable manual operating handle for use during installation or power failure.

Product Highlights

The Honeywell VRN2CHSX7102 valve is essential for maintaining stable flow and temperature in various applications, enhancing system efficiency.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2CHSX7102

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• GPM: 6 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators