Honeywell VRN2CHSA2000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CHSA2000 is a pressure-independent control valve designed for efficient flow and temperature management in hydronic systems. This valve features a 1-inch NPT connection and has a capacity of six gallons per minute (6 GPM). The valve is equipped with an electric actuator and integrates a pressure control cartridge, which allows for flow balancing even during pressure fluctuations.

• Constructed with stainless steel trim for durability.
• Operates using a 24 VAC supply voltage.
• Compatible with water or glycol solutions up to fifty percent.

Product Highlights

This valve is suitable for maintaining consistent temperature control in heating and cooling systems and is ideal for use in residential and commercial applications.

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Input Voltage: 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• GPM: 6 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 0.5 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions, not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (0.5 inch valve) to 95 GPM (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80), 18 lb-in (2 Nm) up to 0.75 inches and 1 inch up to 9 GPM
• Warranty: 1 year on valves, 5 years on actuators