HONEYWELL VRN2CHPX9102 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN2CHPX9102 is a pressure independent control valve that comes with an electric actuator. This assembly is designed to manage both flow and temperature in hydronic systems. It automatically regulates the flow to maintain consistent temperature, even when piping pressures change.

• 1 inch NPT connection
• 2-way valve with a flow rate of 6 GPM
• Operates on 100-250 VAC

Product Highlights

This control valve is essential for efficient system operation and energy conservation.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CHPX9102

Technical Specifications

• Type: Assembly
• Connection: NPT
• Input Voltage: 120 VAC, 240 VAC
• Nominal Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• GPM: 6 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators