Honeywell VRN2CHPX8100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CHPX8100 is a pressure-independent control valve designed for hydronic systems. This valve integrates flow and temperature control into one unit, helping to stabilize temperatures even during pressure changes. It features a built-in pressure control cartridge for optimal flow balancing and is compatible with Honeywell direct-coupled actuators.

• Fits pipe sizes from half inch to three inches with female NPT connections.
• Suitable for both hot and chilled water up to fifty percent glycol mixtures.
• Includes a differential pressure regulator to maintain a constant pressure drop.

Product Highlights

The Honeywell VRN2CHPX8100 is essential for professionals needing reliable control in varying pressure environments.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2CHPX8100

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Nominal Supply Voltage: 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• Flow Rate: 6 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT fittings
• Maximum Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)