Honeywell VRN2CGSX8202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CGSX8202 is a pressure independent control valve with an electric actuator. This valve features a 1-inch NPT connection, a 2-way valve pattern, and a flow rate of 5 GPM. It is equipped with stainless steel trim and designed for on/off control with a fail-safe closed configuration. Operating on 100-250 VAC, it comes housed in a NEMA 3R enclosure. This valve is ideal for controlling hot or chilled water, even with solutions containing up to 50% glycol.

• Features a 1-inch NPT connection and 2-way valve pattern.
• Designed for on/off control with a fail-safe closed configuration.
• Operates on 100-250 VAC and is housed in a NEMA 3R enclosure.

Product Highlights

This product provides reliable flow control for HVAC applications, maintaining efficiency in both hot and cold water systems.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CGSX8202

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Size: 1 in
• Connection: NPT
• Pattern: 2-way
• GPM: 5 GPM
• Trim Material: Stainless Steel
• Supply Voltage: 120 VAC, 240 VAC
• Control Signal: Two Position
• Enclosure: NEMA 3R
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 in valve) to 95 gpm (3 in valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN 20)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed