Honeywell VRN2CGSX8102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CGSX8102 is a pressure-regulated control valve for hydronic systems. This valve helps regulate flow and maintain temperature even when pressures change.

• Has NPT connections.
• Can be used for hot or chilled water with up to fifty percent glycol solutions.
• Incorporates a differential pressure regulator for constant pressure.

Product Highlights

This valve is designed to enhance energy efficiency by balancing flow in different circuits. It is essential for efficient heating and cooling applications.

Product Information

Standard Information

• Manufacturer: Honeywell
• Type: Control Valve

Technical Specifications

• Connection: NPT
• Size: 1 in
• GPM: 5 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Supply Voltage (Nominal): 120 VAC, 240 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inches to 3 inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inches valve) to 95 GPM (3 inches valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inches or 3/4 inches (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inches (DN80); 18 lb-in (2 Nm) up to 3/4 inches (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed