Honeywell VRN2CGPX4002 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN2CGPX4002 is a pressure independent control valve assembly that combines flow and temperature control. This two-way valve has a one inch NPT connection and supports a five GPM flow rate. It features an electric actuator with floating on/off control signal and includes fail-in-place functionality at 24 VAC. The valve body is made from forged brass with plated brass trim and has a flow control insert.

• Features a 1-inch NPT connection.
• Provides a 5 GPM flow rate.
• Includes an electric actuator with floating on/off control.

Product Highlights

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CGPX4002

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Type: Assembly
• Connection: NPT
• Pattern: 2-way
• Size: 1 inches
• GPM: 5 GPM
• Control Signal: Floating, Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inches with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators
• Trim Material: Stainless Steel