HONEYWELL VRN2CDSA1000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CDSA1000 is a pressure independent control valve designed with an electric actuator. This valve operates with a one-inch NPT connection, functions as a two-way valve, and provides a flow rate of two gallons per minute. It has stainless steel trim and is built to sustain a floating on/off control signal. The valve is engineered to fail in place and is suitable for regulating hot or chilled water, including systems with up to fifty percent glycol solutions.

• One-inch NPT connection.
• Two-way valve supports two gallons per minute flow rate.
• Operates with twenty-four VAC.

Product Highlights

This control valve is suitable for HVAC applications where precise flow control is essential. It ensures efficient operation in fluid systems and helps maintain optimal temperature conditions.

Product Information

Standard Information

• Manufacturer: Honeywell
• Brand: Honeywell

Technical Specifications

• MPN: VRN2CDSA1000
• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: One inch
• Pattern: Two-way
• Flow Rate: Two gallons per minute
• Trim Material: Stainless Steel
• Control Signal: Floating, Two Position
• Input Voltage: Twenty-four VAC
• Body Style: Two-way ball valve, full port with flow control
• Pipe Size: Half inch to three inches with female NPT fittings
• Body Pressure Rating: Maximum three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gallon per minute (half inch valve) to ninety-five gallons per minute (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), and eighteen lb-in (two Nm) for three-quarters inch and one inch up to nine gallons per minute