Honeywell VRN2CDPXA100 Dynamic Pressure Regulated Control Valve Assembly

Product Description

The Honeywell VRN Series valve, MPN VRN2CDPXA100, integrates flow and temperature control in a single assembly. This pressure-regulated control valve automatically adjusts flow in hydronic systems to maintain consistent temperature during pressure changes. It includes a built-in pressure control cartridge for effective flow balancing and regulation.

• Features a differential pressure regulator for constant pressure drop.
• Offers equal percentage flow characteristics using a patented flow control ball insert.
• Includes a removable manual operating handle, providing control during installation or power outages.

Product Highlights

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• GPM: 2 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Maximum Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80) 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators