Honeywell VRN2CBSX6202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2CBSX6202 is a pressure independent control valve with an electric actuator. This valve features a one-inch NPT connection and operates with a two-way valve pattern. It allows for a one GPM flow rate and includes stainless steel trim. The design is based on a DCA profile, ensuring reliable temperature control. The valve supports modulating floating control with a fail-safe, closed configuration and operates on twenty-four VAC power. The VRN series effectively integrates flow and temperature control, automatically adjusting flow to maintain a steady temperature even during pressure changes.

• 1-inch NPT connection with a two-way valve pattern.
• Includes stainless steel trim and supports modulating floating control.
• Operates on 24 VAC, maintaining temperature during fluctuations.

Product Highlights

This valve is suitable for various applications, ensuring efficient management of water or glycol solutions up to fifty percent.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2CBSX6202

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1 inch
• GPM: 1 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators