HONEYWELL VRN2CBPX4002 Pressure Regulated Control Valve Assembly

Product Description

The Honeywell VRN2CBPX4002 is a pressure-regulated control valve assembly designed for effective flow management in hydronic systems. This assembly integrates control of both flow and temperature, ensuring stable operation even when pressure varies.

• Features a two-way ball valve with straight-through flow.
• Equipped with female NPT connections.
• Suitable for use with hot and chilled water or glycol solutions.

Product Highlights

This valve maintains consistent temperatures and flow rates in hydronic heating and cooling applications.

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: One inch
• GPM: One GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One half to three inches with female NPT fittings
• Body Pressure Rating: Maximum of 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: From one GPM (one half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one half inch or three quarter inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (4 Nm) up to three inches (DN80), eighteen lb-in (2 Nm) up to three quarter inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators. Actuators available factory-installed.