The Honeywell VRN2BMSX6100 is a dynamic pressure regulated control valve designed for efficient flow and temperature management. It is ideal for hydronic systems where maintaining consistent temperature is critical. This valve integrates an advanced pressure control cartridge ensuring precision flow balancing.
Compatible with Honeywell direct-coupled actuators
Handles hot or chilled water with up to fifty percent glycol solutions
Built with stainless steel trim and designed in a two-way pattern
Product Highlights
Utilizing this valve can significantly enhance system efficiency during pressure fluctuations, ensuring optimal performance in both residential and commercial applications.
Product Information
Standard Information
Brand: Honeywell
MPN: VRN2BMSX6100
Technical Specifications
Type
Assembly
Connection
NPT
Trim Material
Stainless Steel
Pattern
2-way
Size
3/4 inch
GPM
10 GPM
Control Signal
Analog, Floating
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
Medium Temperature Range
-22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
Close-off pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required
35 lb-in (4 Nm) up to 3 inch (DN80); 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 gpm)
Warranty
1 year on valves, 5 years on actuators * These actuators available factory-installed