Honeywell VRN2BMPXA202 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BMPXA202 is a pressure independent control valve engineered for efficient flow management in hydronic systems. This valve utilizes an electric actuator for precise control of flow and temperature. It integrates a pressure control cartridge, ensuring effective flow balancing across systems.

• Features a three-quarter inch NPT connection and two-way valve pattern.
• Designed for a ten GPM flow rate, operating on 24 VAC.
• Includes one auxiliary switch and is housed in a NEMA 3R enclosure.

Product Highlights

The Honeywell VRN2BMPXA202 is ideal for managing water or glycol solutions, ensuring regulatory compliance and efficient system operation.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2BMPXA202

Technical Specifications

• Manufacturer Part Number: VRN2BMPXA202
• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: Three-quarter inch
• Flow Rate: 10 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port
• Pipe Size: Half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80)