HONEYWELL VRN2BLSXB200 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BLSXB200 is a pressure independent control valve for hydronic systems. It automates flow and temperature control, ensuring temperature stability despite pressure changes. The valve features a pressure control cartridge for optimized flow management. It supports water or glycol solutions with a concentration up to fifty percent.

• 3/4 inch NPT connection.
• Maximum flow rate of nine gallons per minute.
• Stainless steel trim for durability.

Product Highlights

This valve is ideal for HVAC systems, providing consistent performance under various pressure conditions.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2BLSXB200

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Size: 3/4 inch
• Pattern: 2-way
• GPM: 9 GPM
• Trim Material: Stainless Steel
• Supply Voltage (Nominal): 24 VAC
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 to DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators.