Honeywell VRN2BKSX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BKSX5000 is a pressure independent control valve designed for hydronic systems. It integrates flow and temperature control, ensuring optimal performance even with varying piping pressures. This valve features a two-way design that maintains efficient water flow, making it suitable for both hot and chilled water systems.

• Features a three-fourths inch NPT connection.
• Regulated flow rate of eight gallons per minute.
• Compatible with water or up to fifty percent glycol solutions.

Product Highlights

This valve is ideal for HVAC applications, helping control the temperature in heating or cooling systems while offering flexibility in installation.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2BKSX5000

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Three-fourths inch
• GPM: Eight gallons per minute
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): Three hundred sixty psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gallon per minute (one-half inch valve) to ninety-five gallons per minute (three-inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505* Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80) eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine gallons per minute)