Honeywell VRN2BKPX6100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BKPX6100 is a pressure independent control valve with an electric actuator. This two-way valve features a three-fourth inch NPT connection and an eight GPM flow rate. It is suitable for use with hot or chilled water and can handle up to fifty percent glycol solutions. The valve body is made from forged brass, with nickel-chrome plated brass or stainless steel trim. It utilizes a modulating floating control signal and is fail-safe open, operating at twenty-four VAC.

• Features a differential pressure regulator for constant pressure drop.
• Employs an equal percentage flow characteristic using a patented flow control ball insert.
• Includes a removable, manual operating handle for control during installation or power failure.

Product Highlights

This valve is designed for dynamic pressure regulation. It ensures consistent performance across various applications, making it ideal for HVAC systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2BKPX6100
• Type: Assembly

Technical Specifications

• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Three-fourth inch
• Flow Rate: Eight GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): Three hundred sixty psi at two hundred fifty degrees Fahrenheit
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit
• Maximum Differential Pressure: One GPM to ninety-five GPM
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch
• Minimum Torque Required: Thirty-five lb-in up to three inches; eighteen lb-in up to three-fourth inch
• Warranty: One year on valves, five years on actuators