Honeywell VRN2BJSX7100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BJSX7100 is a pressure independent control valve that features an electric actuator. This valve is designed with a three-fourth inch NPT connection and operates on a two-way valve pattern, accommodating a flow rate of up to seven gallons per minute. The stainless steel trim construction enhances durability, and the valve is configured with a DCA profile for effective on/off control, ensuring a fail-open setting. It helps manage flow in hydronic systems, adjusting automatically to pressure changes to maintain the desired temperature.

• Features a three-fourth inch NPT connection.
• Designed for on/off control with a fail-open configuration.
• Includes stainless steel trim for enhanced durability.

Product Highlights

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2BJSX7100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: three-fourth inch
• GPM: 7 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at two hundred fifty degrees Fahrenheit (121 degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22 degrees Celsius to 250 degrees Fahrenheit (-30 degrees Celsius to 121 degrees Celsius)
• Maximum Differential Pressure: one GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-fourths inch (and one inch up to nine GPM)
• Warranty: 1 year on valves, 5 years on actuators