Honeywell VRN2BJPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BJPX5000 is a pressure independent control valve. This valve maintains flow and temperature in hydronic systems, ensuring stable temperature during pressure changes. It includes a built-in pressure control cartridge that balances and regulates flow effectively.

• NPT connection with a three-fourths inch size.
• Two-way valve with a flow rate of seven GPM.
• Compatible with water or glycol solutions up to fifty percent.

Product Highlights

This valve is essential for managing flow in heating and cooling systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2BJPX5000
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Connection: NPT
• Pattern: Two-way
• Size: Three-fourths inch
• Flow Rate: Seven GPM
• Control Signal: Analog, Floating
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT fittings
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to fifty percent
• Medium Temperature Range: Minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
• Maximum Differential Pressure: One GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 (only at one-half or three-fourths inch)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches; eighteen lb-in (two Nm) for three-fourths inch (and one inch up to nine GPM)
• Trim Material: Stainless Steel