Honeywell VRN2BJPA0000 Pressure Independent Control Valve 3/4 in NPT 2-Way 7 GPM

Product Description

The Honeywell VRN2BJPA0000 is designed for regulating flow in hydronic systems. This pressure independent control valve has a three-fourths inches NPT connection and supports a flow rate of seven gallons per minute. It balances flow and temperature automatically, ensuring precise control even with changes in pressure. This valve uses a pressure control cartridge which is essential for flow balancing.

• Features a three-fourths inch NPT connection.
• Optimized for a flow rate of seven gallons per minute.
• Compatible with water or glycol solutions up to fifty percent.

Product Highlights

This valve is suitable for applications requiring reliable temperature and flow management in heating and cooling systems.

Product Information

Standard Information

• Manufacturer Part Number: VRN2BJPA0000
• Type: Valve Only

Technical Specifications

• Connection: NPT
• Trim Material: Brass
• Pattern: 2-way
• Size: Three-fourths inches
• GPM: Seven GPM
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT fittings
• Body Pressure Rating: Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One GPM (one-half inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim: Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*. Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourths inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80) eighteen lb-in (two Nm) up to three-fourths inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators. * These actuators available factory-installed.