Honeywell VRN2BHSXA102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BHSXA102 Pressure Independent Control Valve is designed to enhance flow and temperature regulation in hydronic systems. This valve automatically adjusts flow to ensure consistent temperatures even during pressure changes.

• NPT connections make installation straightforward.
• Compatible with water and glycol solutions for versatile use.
• Constructed with durable stainless steel trim for longevity.

Product Highlights

Reliable control of hydronic systems can be achieved with this valve.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2BHSXA102

Technical Specifications

• Valve Type: Dynamic Pressure Regulated Control Valve
• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Pattern: 2-way
• Size: three-fourth inch
• GPM: 6 GPM
• Control Signal: Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: half inch to three inch with female NPT pipe fittings
• Body Pressure Rating (Maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: 1 GPM (half inch valve) to 95 GPM (three inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
• Compatible Actuators Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-fourth inch (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inch (DN80), 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to 9 GPM)