Honeywell VRN2BHSX5002 Dynamic Pressure Regulated Control Valve

Product Description

The Honeywell VRN2BHSX5002 is a dynamic pressure-regulated control valve that integrates flow and temperature control within hydronic systems. This valve automatically adjusts the flow to maintain desired temperatures, compensating for pressure variations in the piping system.

• Features a three-quarter inch NPT connection.
• Regulates flow up to six gallons per minute.
• Compatible with hot or chilled water and glycol solutions up to fifty percent.

Product Highlights

This valve is designed for ease of installation and operation, making it suitable for HVAC professionals.

Product Information

Standard Information

• Type: Assembly
• Connection: NPT

Technical Specifications

• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Three-quarter inch
• GPM: Six gallons per minute
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One GPM (half inch valve) to ninety-five GPM (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators Non-Spring Return: ML6161, ML7161, MN6105, MN7505
• Compatible Actuators Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at half inch or three-quarter inch (DN15 ~ DN 20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80) and eighteen lb-in (two Nm) up to three-quarters inch (and one inch up to nine GPM)
• Warranty: One year on valves, five years on actuators