HONEYWELL VRN2BGPX4002 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2BGPX4002 is a pressure independent control valve assembly that combines a valve and an electric actuator. This product is essential for maintaining a consistent flow rate of hot or chilled water in closed-loop HVAC systems, even with glycol solutions up to fifty percent. It features a three-quarter inch NPT connection and a maximum flow rate of five gallons per minute. The valve operates on a two-position control signal at an input voltage of twenty-four VAC, ensuring reliable operation in various conditions.

• Includes a three-quarter inch NPT connection.
• Designed for a maximum flow rate of five gallons per minute.
• Operates with a floating, two-position control signal.

Product Highlights

This valve is made from forged brass and features nickel-chrome plated brass or stainless steel trim for durability.

Product Information

Standard Information

• Manufacturer Part Number: VRN2BGPX4002
• Valve Type: Dynamic Pressure Regulated Control Valve

Technical Specifications

• Connection: NPT
• Pattern: 2-way
• Size: Three-quarters inches
• Flow Rate: Five gallons per minute
• Control Signal: Floating, Two Position
• Input Voltage: Twenty-four VAC
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Body Pressure Rating: Three hundred sixty psi (two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or Glycol solutions up to fifty percent
• Medium Temperature Range: Minus twenty-two degrees Fahrenheit to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-quarters inches (and one inch up to nine gpm)