The Honeywell VRN2BESXA102 is a pressure independent control valve assembly equipped with an electric actuator. This valve features a three-fourth inch NPT connection, a two-way valve design, and a three gallons per minute flow rate. It comes with stainless steel trim and offers an on/off control signal with fail-open capabilities.
Features a three-fourth inch NPT connection and two-way valve pattern.
Designed for a three gallons per minute flow rate.
Includes an electric actuator with on/off control and fail-open functionality.
Product Highlights
Ideal for use with water and glycol solutions up to fifty percent concentration, this assembly is housed in a NEMA three R enclosure.
Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2BESXA102
Technical Specifications
Type
Assembly
Connection
NPT
Supply Voltage (Nominal)
24 VAC
Trim Material
Stainless Steel
Pattern
Two-way
Size
Three-fourth inch
Flow Rate
Three gallons per minute
Control Signal
Two Position
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
One-half inch to three inches with female NPT pipe fittings
Body Pressure Rating (Maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
Medium Temperature Range
Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
Maximum Differential Pressure
One gpm (one-half inch valve) to ninety-five gpm (three-inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (Ball and Stem)
Nickel-chrome plated brass or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN20)
Minimum Torque Required
35 lb-in (4 Nm) up to three inches (DN80) 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine gpm)