Honeywell VRN2BESX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BESX5000 is a pressure independent control valve designed for regulating flow in hydronic systems. This valve adjusts the flow automatically to maintain the correct temperature even with varying pressure levels. It features an integrated pressure control cartridge that provides both flow balancing and control, making it ideal for use with Honeywell direct-coupled actuators.

• NPT connection for secure installation.
• Operates with a nominal twenty-four VAC supply voltage.
• Stainless steel trim offers durability.

Product Highlights

This valve effectively manages water and glycol solutions, making it suitable for various applications in HVAC systems.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2BESX5000

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: three-fourth in
• GPM: 3 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: one-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: one gpm (one-half inch valve) to ninety-five gpm (three inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-fourth inch (DN15 ~ DN 20)
• Minimum Torque Required: thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-fourth inch (and one inch up to nine gpm)
• Warranty: one year on valves, five years on actuators; these actuators available factory-installed
• Packaging: Box
• Product Status: Active