Honeywell VRN2BEPXD000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2BEPXD000 Pressure Independent Control Valve maintains temperature in hydronic systems. It controls flow automatically to accommodate changes in piping pressures. The integrated pressure control cartridge provides balancing and control of fluid flow.

• Available sizes from one half inch to three inch with female NPT connections.
• Suitable for water or glycol solutions up to fifty percent.
• Includes a differential pressure regulator for maintaining constant pressure.

Product Highlights

This control valve is efficient in managing flow and temperature for hydronic systems, making it ideal for use in HVAC applications.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2BEPXD000

Technical Specifications

• Type: Control Valve
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Pattern: 2-way
• Size: 3/4 inch
• GPM: 3 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 inch to 3 inch with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 inch valve) to 95 gpm (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN 20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch and 1 inch up to 9 gpm
• Warranty: 1 year on valves, 5 years on actuators * These actuators available factory-installed.
• Trim Material: Stainless Steel
• Product Status: Active