Honeywell VRN2BEPA1001 Pressure Independent Control Valve

Product Description

The Honeywell VRN Series VRN2BEPA1001 is a pressure independent control valve featuring an electric actuator. This two-way valve includes a three-fourth inch NPT connection and supports a flow rate of three gallons per minute. Designed for efficiency, it operates on twenty-four VAC and integrates both flow control and temperature functions within a single assembly.

• Features a three-fourth inch NPT connection.
• Operates on a twenty-four VAC supply voltage.
• Suitable for water and glycol solutions up to fifty percent.

Product Highlights

This valve is ideal for HVAC systems requiring precise temperature control.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2BEPA1001

Technical Specifications

• Manufacturer Part Number: VRN2BEPA1001
• Valve Type: Dynamic Pressure Regulated Control Valve
• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Pattern: Two-way
• Size: Three-fourth inch
• GPM: Three gallons per minute
• Control Signal: Floating, Two Position
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Minus twenty-two Celsius to two hundred fifty Fahrenheit (Minus thirty Celsius to one hundred twenty-one Celsius)
• Maximum Differential Pressure: One gpm (one-half inch valve) to ninety-five gpm (three inch valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine gpm)