Honeywell VRN2BBPX4002 Pressure Independent Control Valve Assembly

Product Description

The Honeywell VRN Series valve, MPN VRN2BBPX4002, controls flow and temperature in hydronic systems. This assembly automatically adjusts flow to maintain temperature during pressure changes. It integrates a pressure control cartridge for effective flow balancing and control.

• Features a three-fourth inch NPT connection.
• Designed for two-way operation with a flow rate of one gallon per minute.
• Operates using a twenty-four VAC supply voltage.

Product Highlights

Efficiently manages hot or chilled water with the capability for up to fifty percent glycol solutions.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2BBPX4002

Technical Specifications

• Type: Control Valve Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: Three-fourth inch
• GPM: 1 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: Half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half inch or three-fourth inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80); 18 lb-in (2 Nm) up to three-fourth inch (and one inch up to nine GPM)
• Warranty: 1 year on valves, 5 years on actuators