Honeywell VRN2AJPXC002 Pressure Independent Control Valve with Electric Actuator

Product Description

The Honeywell VRN Series VRN2AJPXC002 is a pressure independent control valve designed for efficient flow and temperature management in hydronic systems. This assembly automatically regulates flow to maintain stable temperatures despite fluctuating piping pressures. It includes an integrated pressure control cartridge, ensuring consistent flow balancing and control.

• Valve size: One half inch NPT.
• Maximum flow rate: Seven gallons per minute.
• Control signal: Floating, Two Position.

Product Highlights

The VRN2AJPXC002 is suitable for a variety of applications and enhances system efficiency significantly.

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer Part Number: VRN2AJPXC002

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Pattern: Two-way
• Maximum Flow Rate: 7 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port
• Pipe Size: One half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: Minus twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (minus thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators - Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*
• Compatible Actuators - Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch
• Warranty: 1 year on valves, 5 years on actuators
• Trim Material: Stainless Steel