Honeywell VRN2AJPX7200 Pressure Independent Control Valve and Actuator Assembly

Product Description

The Honeywell VRN2AJPX7200 is a pressure independent control valve assembly with an electric actuator. This assembly ensures a steady flow of hot or chilled water, mixed with up to fifty percent glycol, in closed-loop HVAC systems. With a half-inch NPT connection and a two-way valve pattern, it supports a seven GPM flow rate. The assembly includes a plated brass trim and a direct coupled actuator profile for on/off control, designed to fail safely in the closed position, operating at twenty-four VAC. It has an integrated pressure control cartridge for effective flow balancing and control.

• Maintains constant flow regardless of pressure fluctuations.
• Features a differential pressure regulator for consistent pressure drop.
• Suitable for water or glycol solutions up to fifty percent.

Product Highlights

This assembly is reliable for maintaining flow in HVAC systems, essential for efficient heating and cooling.

Product Information

Standard Information

• Manufacturer: Honeywell
• Type: Assembly

Technical Specifications

• MPN: VRN2AJPX7200
• Connection: NPT
• Pattern: 2-way
• Size: 1/2 in
• Flow Rate: 7 GPM
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: 2-Way ball valve, straight-through flow, full port
• Body Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°F to 250°F (-30°C to 121°C)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim: Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3inch (DN80), 18 lb-in (2 Nm) for specific sizes
• Weight: 7 lbs
• Production Status: Active