Honeywell VRN2AHPX5000 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AHPX5000 is a pressure independent control valve that features an electric actuator. This valve is designed to control flow and temperature in hydronic systems. It includes a pressure control cartridge that allows for flow balancing. The valve is suitable for use with water or glycol solutions at a concentration of up to fifty percent.

• 1/2 inch NPT connection
• Designed for two-way flow with a capacity of six GPM
• Compatible with Honeywell N05/S05-series direct coupled actuators

Product Highlights

The valve supports modulating floating control and has fail-in-place functionality with a 24 VAC power supply.

Product Information

Standard Information

• Manufacturer: Honeywell
• Brand: Honeywell

Technical Specifications

• MPN: VRN2AHPX5000
• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: 1/2 inch
• Pattern: 2-way
• GPM: 6 GPM
• Control Signal: Analog, Floating
• Input Voltage: 24 VAC
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Maximum Pressure Rating: 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body Material: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim Material: Stainless Steel
• Trim (Ball and Stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators