Honeywell VRN2AGSX7100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AGSX7100 is a pressure independent control valve designed for use in hydronic systems. This assembly features a half-inch NPT connection and a two-way valve pattern. It operates on a flow rate of five gallons per minute and utilizes an electric actuator powered at twenty-four volts alternating current. The valve is constructed with stainless steel trim and is suitable for on/off control with a fail-open configuration. This design ensures that it effectively regulates flow and temperature, maintaining the system's efficiency during pressure fluctuations.

• Features a half-inch NPT connection and two-way valve pattern.
• Includes stainless steel trim and operates at twenty-four volts AC.
• Designed for on/off control with a fail-open configuration.

Product Highlights

Product Information

Standard Information

• Brand: Honeywell
• Manufacturer: Honeywell

Technical Specifications

• MPN: VRN2AGSX7100
• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: Two-way
• Size: half-inch
• GPM: five gallons per minute
• Control Signal: Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: half-inch to three inches with female NPT pipe fittings
• Body Pressure Rating (max): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to fifty percent; not for combustible gases, oil, or steam
• Medium Temperature Range: minus twenty-two degrees Celsius to 250°F (minus thirty degrees Celsius to 121°C)
• Maximum Differential Pressure: one GPM (half-inch valve) to ninety-five GPM (three-inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at half-inch or three-quarter inch (DN15 to DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to three inches (DN80), 18 lb-in (2 Nm) up to three-quarter inch (and one inch up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators; these actuators available factory-installed.
• Weight: 7 lbs
• Unit of Measurement: EA (Each)
• Production Status: Active