The Honeywell VRN2AGPX6200 is a pressure independent control valve designed to optimize flow management in hydronic systems. This valve features an electric actuator that integrates flow and temperature control, maintaining consistent temperatures even when piping pressures fluctuate. The integrated pressure control cartridge ensures effective flow balancing. This model is a 2-way valve equipped with a half-inch NPT connection and a maximum flow rate of five gallons per minute, ideal for use with water and glycol solutions.
Integrated pressure control cartridge for balanced flow.
Electric actuator for precise temperature control.
Designed for water and glycol solutions up to fifty percent.
Product Highlights
The Honeywell pressure independent control valve is essential for reliable hydronic system performance, ensuring temperature stability and effective flow management.
Product Information
Standard Information
Brand: Honeywell
Manufacturer Part Number: VRN2AGPX6200
Technical Specifications
Type
Assembly
Connection
NPT
Trim Material
Stainless Steel
Pattern
2-way
Size
1/2 in
Flow Rate
5 GPM
Control Signal
Analog, Floating
Valve Type
Dynamic Pressure Regulated Control Valve
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
1/2 inch to 3 inch with female NPT pipe fittings
Body Pressure Rating (maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
Medium Temperature Range
-22°F to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators
Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105, MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch (DN15 ~ DN20)
Minimum Torque Required
35 lb-in (4 Nm) up to 3 inch (DN80), 18 lb-in (2 Nm) up to 3/4 inch (and 1 inch up to 9 GPM)