Honeywell VRN2AGPX6100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AGPX6100 is a pressure independent control valve that integrates flow and temperature control effectively. This valve features a pressure control cartridge for flow balancing and is suitable for use with hot or chilled water, as well as up to fifty percent glycol solutions. It includes female NPT connections, making it compatible with Honeywell direct-coupled actuators. The valve body is constructed from forged brass while the trim includes plated brass.

• Sizes available range from one half to three inches with NPT connections.
• Compatible with water or glycol solutions up to fifty percent.
• Incorporates a differential pressure regulator for maintaining a constant pressure drop.

Product Highlights

This valve is essential for applications requiring precise flow rates and temperature control in HVAC systems.

Product Information

Standard Information

• Manufacturer: Honeywell
• MPN: VRN2AGPX6100

Technical Specifications

• Type: Assembly
• Connection: NPT
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1/2 inches to 3 inches
• GPM: 5 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105, MN7505; Spring Return: MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 inch, 18 lb-in (2 Nm) up to 3/4 inch
• Warranty: 1 year on valves, 5 years on actuators